230mm Quadcopter FPV Racing Drone Full Carbon Fiber PNP with Camera and VTX Green or Red 3d Print

Price: $139.84

Please Choose:


Free Shipping

Material: Full Carbon Fiber
Frame width: 230mm
3D Printing Part: Green or Red
LED: White
Net weight of Frame: About 120g
Take off weight:About 390g
Thickness of  Top Plates:1.5 mm
Thickness of  Bottom Plates:1.5 mm
Brushless ESC: 20A
Flight Controller:SP Racing F3
Propeller: 5 Inch
Flight Time:5-8 minutes
Camera: 720TVL cmos
Camera Angles: 127°
Camera Input: DC 12V
Video Transmission:5.8Ghz 200mW 40CH
Video Type: PAL/NTSC
Copter Battery (Not included) :3S 1300mah to 1800mah

KV: 2300KV
Stator Diameter: 22mm
Stator Length: 4.0mm
Shaft Diameter: M5
Motor Dimensions(Dia.*Len): Φ28×17.5mm
Max Continuous current(A):10.5A
Max Continuous Power(W):117W

Item:Brushless ESC
Output: Continuous 20A
Burst: 25A(10s)
Usage:for RC Models

Flight Controller:
Name:F3 SP Racing Acro
Dimension: 3.5cm *3.5cm
Weight: 6g

Power supply:3.6-5.5V(powered off VTX)
Power consumption:60ma @5V
Imager:1/3'' CMOS,720 TVL
Video system:PAL
FPV tuned light handling
Lens:2.6mm IR coated
FOV:127°diagonal 160°horizontal
    (ideal for fixed camera)
Operation Temperature:-20°to 70°
      Square:32 X 32 X 23.5mm
      Lens extrude(L X Dia):15mm X 14mm

Video Transmission:

Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 22-24dBm
Output Voltage:5V
Frequency Range:5645-5945 Mhz
Channel: 40 CH
Operating Voltage: 7V-20V
Supply Current: 280mA
Operating Temperature: -10°C~85°C
Video Band Width: 0-8.0 Mhz
Audio Carrier Frequency: 6.5 MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Antenna connection: SMA Female
Weight: 15g

Operation Instruction:  
1,Connect the 5 pin terminal cable
2,Screw on the antenna
3,Powering on the device,nixie tube will indicate A1
4,Power on,press the "CH" button to change channel,"CH" digital display will change sychronously."CH" digital display changes cyclically from 1 to 8
5,Power on,press the "FR" button to change the frequency band."FR" digital display will change sychronously "FR"digital display changes cyclically from 1 to 5

How To Connect to your Receiver:
Please refer to the picture,click here

Package Include:

Quadcopter(with Camera and VTX) *1
Mushroom Antenna TX *1

Motor Pad *4

  • Model: L230 PNP
  • Shipping Weight: 2lbs
  • Units in Stock200

This product was added to our catalog on Friday 17 June, 2016.